From the Ground Up - Atmospheric Pressure
The pressure of the atmosphere at any point is due to the weight of overlying air. Pressure at the surface of the earth is usually measured by the mercury barometer and is expressed in inches of mercury ( "Hg).
STATION PRESSURE
Station pressure is the actual atmospheric pressure at the elevation of the observing station. It is, in other words, the actual weight of a column of air extending up from the station level to the outer limit of the atmosphere. The value is determined directly from the mercury barometer at the observing station.
For example: The weight of the atmosphere decreases with altitude, the atmospheric pressure reading at a station at 5.000 feet elevation will be less than that at a station at 1,000 feet and still less than that at a station at sea level.
MEAN SEA LEVEL PRESSURE
To have a consistent record of the distribution of atmospheric pressure, it is necessary to reduce the station pressures to a common level. This standard is called mean sea level (MSL) pressure. The reduction to MSL pressure involves adding to the station pressure the weight of an imaginary column of air extending from the station level down to mean sea level. In determining MSL pressure, local temperature must be taken into account. The temperature value is based on the average of the surface temperatures at the time of observation and for 12 hours before the time of observation. Mean sea level pressure is expressed in hectopascals.
ALTIMETER SETTING
To make an altimeter in an airplane correctly read the true height above mean sea level, it must be set to a standard atmospheric pressure. This pressure reading is called the altimeter setting. It differs slightly from the mean sea level pressure.
In reducing station pressure to sea level pressure for altimeter setting purposes, the standard sea level temperature of l S'C and the standard lapse rate of 1.98·C per 1,000 feet is used in computing the equivalents.
When correctly set, the altimeter will then read the true elevation of the airport at which the airplane is parked. If a pilot does not know the altimeter setting but does know the elevation of the airport at which the airplane is parked, he/SHE can dial in the correct elevation and get also the correct altimeter setting.
Altimeter setting is reported in inches of mercury.
A pressure expressed as 29.92 inches of mercury is equivalent to 1013.2 hectopascals.
From the Ground Up - Atmospheric Pressure
The pressure of the atmosphere at any point is due to the weight of overlying air. Pressure at the surface of the earth is usually measured by the mercury barometer and is expressed in inches of mercury ( "Hg).
STATION PRESSURE
Station pressure is the actual atmospheric pressure at the elevation of the observing station. It is, in other words, the actual weight of a column of air extending up from the station level to the outer limit of the atmosphere. The value is determined directly from the mercury barometer at the observing station.
For example: The weight of the atmosphere decreases with altitude, the atmospheric pressure reading at a station at 5.000 feet elevation will be less than that at a station at 1,000 feet and still less than that at a station at sea level.
MEAN SEA LEVEL PRESSURE
To have a consistent record of the distribution of atmospheric pressure, it is necessary to reduce the station pressures to a common level. This standard is called mean sea level (MSL) pressure. The reduction to MSL pressure involves adding to the station pressure the weight of an imaginary column of air extending from the station level down to mean sea level. In determining MSL pressure, local temperature must be taken into account. The temperature value is based on the average of the surface temperatures at the time of observation and for 12 hours before the time of observation. Mean sea level pressure is expressed in hectopascals.
ALTIMETER SETTING
To make an altimeter in an airplane correctly read the true height above mean sea level, it must be set to a standard atmospheric pressure. This pressure reading is called the altimeter setting. It differs slightly from the mean sea level pressure.
In reducing station pressure to sea level pressure for altimeter setting purposes, the standard sea level temperature of l S'C and the standard lapse rate of 1.98·C per 1,000 feet is used in computing the equivalents.
When correctly set, the altimeter will then read the true elevation of the airport at which the airplane is parked. If a pilot does not know the altimeter setting but does know the elevation of the airport at which the airplane is parked, he/SHE can dial in the correct elevation and get also the correct altimeter setting.
Altimeter setting is reported in inches of mercury.
A pressure expressed as 29.92 inches of mercury is equivalent to 1013.2 hectopascals.