Reference: AIM (COM) 8.0 TRANSPONDER OPERATION
Use and Importance of Transponders in ATS Surveillance:
Transponders significantly enhance Air Traffic Services (ATS) surveillance by improving the detection and tracking of aircraft. When equipped with Mode C (automatic pressure altitude reporting), transponders allow controllers to rapidly assess vertical separation and identify potential conflicts, contributing to both VFR and IFR traffic safety.
Proper transponder procedures lead to:
- Increased situational awareness
- Reduced ATC communication workload
- More efficient handling of air traffic
Compliance with ATC Instructions
When given instructions by Air Traffic Control (ATC) regarding transponder operation, pilots must:
- Follow the directive until further instructions are received or the flight has ended
- Continue transponder operation as directed unless in an emergency, communication failure, or unlawful interference
Emergency Codes and Alarm Systems
ATC surveillance systems include automatic alarms that activate when the following codes are selected:
- 7500 – Unlawful interference (hijacking)
- 7600 – Communication failure
- 7700 – Emergency
These codes can be accidentally selected during code changes, especially if the first two digits are ‘7’. To avoid false alarms, use a neutral intermediate code.
Example:
When switching from 1700 to 7100,
- Do not pass through 7700
- Instead, first set 1100, then select 7100
Important:
Do not switch to STANDBY mode while changing codes — this causes the aircraft’s transponder return to disappear from ATC radar displays.
Taxi and Runway Procedures
Transponder operating procedures on the ground:
- STANDBY while taxiing for departure
- Set to ON (or NORMAL) just before takeoff, typically when entering the active runway
- After landing, return to STANDBY or OFF as soon as possible after vacating the runway
At some airports, Multilateration (MLAT) is used for ground surveillance. MLAT relies on transponder returns. Therefore:
- Keep transponders in transmit mode at all times when on the manoeuvring area
- Always ensure the assigned code is selected before exiting STANDBY
- If no code is assigned, use Code 1000
Reference: AIM (COM) 8.0 TRANSPONDER OPERATION
Use and Importance of Transponders in ATS Surveillance:
Transponders significantly enhance Air Traffic Services (ATS) surveillance by improving the detection and tracking of aircraft. When equipped with Mode C (automatic pressure altitude reporting), transponders allow controllers to rapidly assess vertical separation and identify potential conflicts, contributing to both VFR and IFR traffic safety.
Proper transponder procedures lead to:
- Increased situational awareness
- Reduced ATC communication workload
- More efficient handling of air traffic
Compliance with ATC Instructions
When given instructions by Air Traffic Control (ATC) regarding transponder operation, pilots must:
- Follow the directive until further instructions are received or the flight has ended
- Continue transponder operation as directed unless in an emergency, communication failure, or unlawful interference
Emergency Codes and Alarm Systems
ATC surveillance systems include automatic alarms that activate when the following codes are selected:
- 7500 – Unlawful interference (hijacking)
- 7600 – Communication failure
- 7700 – Emergency
These codes can be accidentally selected during code changes, especially if the first two digits are ‘7’. To avoid false alarms, use a neutral intermediate code.
Example:
When switching from 1700 to 7100,
- Do not pass through 7700
- Instead, first set 1100, then select 7100
Important:
Do not switch to STANDBY mode while changing codes — this causes the aircraft’s transponder return to disappear from ATC radar displays.
Taxi and Runway Procedures
Transponder operating procedures on the ground:
- STANDBY while taxiing for departure
- Set to ON (or NORMAL) just before takeoff, typically when entering the active runway
- After landing, return to STANDBY or OFF as soon as possible after vacating the runway
At some airports, Multilateration (MLAT) is used for ground surveillance. MLAT relies on transponder returns. Therefore:
- Keep transponders in transmit mode at all times when on the manoeuvring area
- Always ensure the assigned code is selected before exiting STANDBY
- If no code is assigned, use Code 1000