How Reverse Sensing Works
Correct OBS Setting:
When the OBS is set to the correct course, the CDI needle indicates the direction the aircraft needs to turn to intercept the desired radial.
For example, if you are flying TO a VOR station on the 090° radial, setting the OBS to 090° will cause the needle to deflect left if you are right of course, and right if you are left of course.
Incorrect OBS Setting (Reverse Sensing):
If the OBS is set to the reciprocal course, the CDI needle will indicate the opposite of the correct direction.
For example, if you are flying FROM the VOR station on the 090° radial but incorrectly set the OBS to 270° at the top of the VOR dial, if he needle is to the right, the needle will deflect further right as you try to capture the course. You will never get on course as it keeps going away from you. When you fly outbound, the correct thing to do is to set 090 at the top of the dial.
If you are flying TO the VOR station on the 090° radial but set the OBS to 270° at the top of the dial, the same thing will occur. When you fly inbound, the correct thing to do is to set 090 at the bottom of the VOR dial.
I.B.O.T
This is a memory aid, IBOT, which stands for Inbound Bottom, Outbound Top.
So when flying inbound, set the desired radial at the bottom, when flying outbound, set the desired radial at the top.
How Reverse Sensing Works
Correct OBS Setting:
When the OBS is set to the correct course, the CDI needle indicates the direction the aircraft needs to turn to intercept the desired radial.
For example, if you are flying TO a VOR station on the 090° radial, setting the OBS to 090° will cause the needle to deflect left if you are right of course, and right if you are left of course.
Incorrect OBS Setting (Reverse Sensing):
If the OBS is set to the reciprocal course, the CDI needle will indicate the opposite of the correct direction.
For example, if you are flying FROM the VOR station on the 090° radial but incorrectly set the OBS to 270° at the top of the VOR dial, if he needle is to the right, the needle will deflect further right as you try to capture the course. You will never get on course as it keeps going away from you. When you fly outbound, the correct thing to do is to set 090 at the top of the dial.
If you are flying TO the VOR station on the 090° radial but set the OBS to 270° at the top of the dial, the same thing will occur. When you fly inbound, the correct thing to do is to set 090 at the bottom of the VOR dial.
I.B.O.T
This is a memory aid, IBOT, which stands for Inbound Bottom, Outbound Top.
So when flying inbound, set the desired radial at the bottom, when flying outbound, set the desired radial at the top.